Shop
Showing 391–405 of 1459 resultsSorted by latest
-
Solideal RES 550 Magnum (black)
Solideal RES 550 Magnum, 4.00-4, rim 2.50, STD – black tires
Solideal RES 550 Magnum, 4.00-4, rim 2.50, STD – black tires. Weight – 6.8 kg, outer tire diameter – 307 mm, width – 96 mm, rim – 2.50.
- Manufacturer - Solideal by Michelin, series RES 550 Magnum
- Dimensions – 4.00-4, rim 2.50
- Installation – standard fitting tire (STD)
- Blend - black, for medium intensity work
- Permissible load (counterbalance trucks, up to 25 km/h) – load wheel 535 kg, steering wheel 410 kg
A proven design elastic tire for medium-intensity operations, built on over 25 years of experience. The wide profile and flat contact surface ensure stable handling, even wear, and reliable traction in daily work.
-
Solideal RES 550 Magnum (black)
Solideal RES 550 Magnum, 4.00-4, rim 2.10, STD – black tires
Solideal RES 550 Magnum, 4.00-4, rim 2.10, STD – black tires. Weight – 6.8 kg, outer tire diameter – 307 mm, width – 96 mm, rim – 2.10.
- Manufacturer - Solideal by Michelin, series RES 550 Magnum
- Dimensions – 4.00-4, rim 2.10
- Installation – standard fitting tire (STD)
- Blend - black, for medium intensity work
- Permissible load (counterbalance trucks, up to 25 km/h) – load wheel 535 kg, steering wheel 410 kg
A proven design elastic tire for medium-intensity operations, built on over 25 years of experience. The wide profile and flat contact surface ensure stable handling, even wear, and reliable traction in daily work.
-
Solideal RES 550 Magnum (black)
Solideal RES 550 Magnum, 3.00-4, rim 2.50, STD – black tires
Solideal RES 550 Magnum, 3.00-4, rim 2.50, STD – black tires. Weight – 3.8 kg, outer tire diameter – 251 mm, width – 84 mm, rim – 2.50.
- Manufacturer - Solideal by Michelin, series RES 550 Magnum
- Dimensions – 3.00-4, rim 2.50
- Installation – standard fitting tire (STD)
- Blend - black, for medium intensity work
- Permissible load (counterbalance trucks, up to 25 km/h) – load wheel 255 kg, steer wheel 195 kg
A proven design elastic tire for medium-intensity operations, built on over 25 years of experience. The wide profile and flat contact surface ensure stable handling, even wear, and reliable traction in daily work.
-
Solideal RES 550 Magnum (black)
Solideal RES 550 Magnum, 3.00-4, rim 2.10, STD – black tires
Solideal RES 550 Magnum, 3.00-4, rim 2.10, STD – black tires. Weight – 3.6 kg, outer tire diameter – 251 mm, width – 84 mm, rim – 2.10.
- Manufacturer - Solideal by Michelin, series RES 550 Magnum
- Dimensions – 3.00-4, rim 2.10
- Installation – standard fitting tire (STD)
- Blend - black, for medium intensity work
- Permissible load (counterbalance trucks, up to 25 km/h) – load wheel 255 kg, steer wheel 195 kg
A proven design elastic tire for medium-intensity operations, built on over 25 years of experience. The wide profile and flat contact surface ensure stable handling, even wear, and reliable traction in daily work.
-
MIDAC traction batteries for charging technology
MIDAC 80V 930Ah traction battery 80V6MDL155 (80V6PzS930), 1028x999x784 mm
MIDAC 80V 930Ah traction battery 80V6MDL155 (80V6PzS930), 1028x999x784 mm
- Voltage: 80 V, capacity (C5): 930 Ah
- MIDAC cells – 6MDL155, comply with DIN standard PzS cells 6PzS930 (designation: 80V6MDL155 = 80V6PzS930Ah)
- Dimensions (length x width x height) – 1028 x 999 x 784 mm, weight – 2096 kg
- Drawing no. – 571498 (the drawing in PDF format can be found under the „Technical documents (PDF)“ section)
- Recommended charging current – 116.3 – 186 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 80V6MDL155 is the same as 80V6PzS930Ah (80 V, 930 Ah). It is suitable as a replacement for 80V 6PzS930 traction batteries from other manufacturers, provided the battery box dimensions (1028 x 999 x 784 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for charging technology
MIDAC 80V 625Ah traction battery 80V5MDL125 (80V5PzS625), 1026x852x627 mm
MIDAC 80V 625Ah traction battery 80V5MDL125 (80V5PzS625), 1026x852x627 mm
- Voltage – 80 V, capacity (C5) – 625 Ah
- MIDAC cells – 5MDL125, comply with DIN standard PzS cells 5PzS625 (designation: 80V5MDL125 = 80V5PzS625Ah)
- Dimensions (length x width x height) – 1026 x 852 x 627 mm, weight – 1438 kg
- Drawing No. 574910 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current is 78.1 – 125 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 80V5MDL125 is the same as 80V5PzS625Ah (80 V, 625 Ah). It is suitable as a replacement for 80V 625 Ah traction batteries from other manufacturers, provided that the box dimensions (1026 x 852 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for charging technology
MIDAC 80V 500Ah traction battery 80V4MDL125 (80V4PzS500), 1026x708x627 mm
MIDAC 80V 500Ah traction battery 80V4MDL125 (80V4PzS500), 1026x708x627 mm
- Voltage – 80 V, capacity (C5) – 500 Ah
- MIDAC cells – 4MDL125, comply with DIN standard PzS cells 4PzS500 (designation: 80V4MDL125 = 80V4PzS500Ah)
- Dimensions (length x width x height) – 1026 x 708 x 627 mm, weight – 1188 kg
- Drawing No. – 574912 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current – 62.5 – 100 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 80V4MDL125 is the same as 80V4PzS500Ah (80 V, 500 Ah). It can be used as a replacement for 80V 4PzS500 traction batteries from other manufacturers, provided that the battery box dimensions (1026 x 708 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for charging technology
MIDAC 48V 775Ah traction battery 48V5MDL155 (48V5PzS775), 1223x427x784 mm
MIDAC 48V 775Ah traction battery 48V5MDL155 (48V5PzS775), 1223x427x784 mm
- Voltage: 48 V, capacity (C5): 775 Ah
- MIDAC cells – 5MDL155, comply with DIN standard PzS cells 5PzS775 (designation: 48V5MDL155 = 48V5PzS775Ah)
- Dimensions (length x width x height) – 1223 x 427 x 784 mm, weight – 1089 kg
- Drawing No. – 545238 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current: 96.9 – 155 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 48V5MDL155 is the same as 48V5PzS775Ah (48 V, 775 Ah). It is suitable as a replacement for 48V 5PzS775 traction batteries from other manufacturers, provided the battery box dimensions (1223 x 427 x 784 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for charging technology
MIDAC 48V 620Ah traction battery 48V4MDL155 (48V4PzS620), 1223x355x784 mm
MIDAC 48V 620Ah traction battery 48V4MDL155 (48V4PzS620), 1223x355x784 mm
- Voltage: 48 V, capacity (C5): 620 Ah
- MIDAC cells – 4MDL155, comply with DIN standard PzS cells 4PzS620 (designation: 48V4MDL155 = 48V4PzS620Ah)
- Dimensions (length x width x height) – 1223 x 355 x 784 mm, weight – 904 kg
- Drawing No. – 545240 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current – 77.5 – 124 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 48V4MDL155 is the same as 48V4PzS620Ah (48 V, 620 Ah). It is suitable as a replacement for 48V 4PzS620 traction batteries from other manufacturers, provided that the box dimensions (1223 x 355 x 784 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 1000Ah traction battery 24V8MDL125 (24V8PzS1000), 830x489x627 mm
MIDAC 24V 1000Ah traction battery 24V8MDL125 (24V8PzS1000), 830x489x627 mm
- Voltage – 24 V, capacity (C5) – 1000 Ah
- MIDAC cells - 8MDL125, comply with DIN standard PzS cells 8PzS1000 (designation: 24V8MDL125 = 24V8PzS1000Ah)
- Dimensions (length x width x height) – 830 x 489 x 627 mm, weight – 666 kg
- Drawing No. – 579116 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current – 125 – 200 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V8MDL125 is the same as 24V8PzS1000Ah (24 V, 1000 Ah). It is suitable as a replacement for 24V 8PzS1000 traction batteries from other manufacturers, provided the box dimensions (830 x 489 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 875Ah traction battery 24V7MDL125 (24V7PzS875), 830x435x627 mm
MIDAC 24V 875Ah traction battery 24V7MDL125 (24V7PzS875), 830x435x627 mm
- Voltage: 24 V, capacity (C5): 875 Ah
- MIDAC cells – 7MDL125, comply with DIN standard PzS cells 7PzS875 (designation: 24V7MDL125 = 24V7PzS875Ah)
- Dimensions (length x width x height) – 830 x 435 x 627 mm, weight – 592 kg
- Drawing No. – 579118 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current: 109.4 – 175 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V7MDL125 is the same as 24V7PzS875Ah (24 V, 875 Ah). It can be used as a replacement for 24V 7PzS875 traction batteries from other manufacturers, provided the battery box dimensions (830 x 435 x 627 mm) and the layout of the terminals and connector match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 375Ah traction battery 24V3MDL125 (24V3PzS375), 830x219x627 mm
MIDAC 24V 375Ah traction battery 24V3MDL125 (24V3PzS375), 830x219x627 mm
- Voltage – 24 V, capacity (C5) – 375 Ah
- MIDAC cells – 3MDL125, comply with the DIN standard PzS cells 3PzS375 (designation: 24V3MDL125 = 24V3PzS375Ah)
- Dimensions (length x width x height) – 830 x 219 x 627 mm, weight – 295 kg
- Drawing No. – 577332 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current: 46.9 – 75 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V3MDL125 is the same as 24V3PzS375Ah (24 V, 375 Ah). It is suitable as a replacement for 24V 3PzS375 traction batteries from other manufacturers if the box dimensions (830 x 219 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 270Ah traction battery 24V3MDL90 (24V3PzS270), 624x284x537 mm
MIDAC 24V 270Ah traction battery 24V3MDL90 (24V3PzS270), 624x284x537 mm
- Voltage – 24 V, capacity (C5) – 270 Ah
- MIDAC cells – 3MDL90, comply with DIN standard PzS cells 3PzS270 (designation: 24V3MDL90 = 24V3PzS270Ah)
- Dimensions (length x width x height) – 624 x 284 x 537 mm, weight – 237 kg
- Drawing no. - 561616 (the drawing in PDF format can be found under the „Technical documents (PDF)“ section)
- Recommended charging current: 33.8 – 54 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V3MDL90 is the same as 24V3PzS270Ah (24 V, 270 Ah). It is suitable as a replacement for 24V 3PzS270 traction batteries from other manufacturers, provided that the box dimensions (624 x 284 x 537 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 240Ah traction battery 24V3MDL80 (24V3PzS240), 830x219x537 mm
MIDAC 24V 240Ah traction battery 24V3MDL80 (24V3PzS240), 830x219x537 mm
- Voltage – 24 V, capacity (C5) – 240 Ah
- MIDAC cells – 3MDL80, compliant with DIN standard PzS cells 3PzS240 (designation: 24V3MDL80 = 24V3PzS240Ah)
- Dimensions (length x width x height) – 830 x 219 x 537 mm, weight – 239 kg
- Drawing No. – 561630 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current is 30 – 48 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V3MDL80 is the same as 24V3PzS240Ah (24 V, 240 Ah). It is suitable as a replacement for 24V 3PzS240 traction batteries from other manufacturers, provided that the box dimensions (830 x 219 x 537 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Enersys FIAMM traction batteries for charging technology
Enersys FIAMM 80V 930Ah traction battery 80V6PzS930, 1025x996x782 mm (Still RX60-50)
Enersys FIAMM 80V 930Ah traction battery 80V6PzS930, 1025x996x782 mm (Still RX60-50)
- Voltage: 80 V, capacity (C5): 930 Ah
- Cells – 6PzS930, DIN standard PzS cells (designation: 80V6PzS930Ah)
- Dimensions (length x width x height) – 1025 x 996 x 782 mm, weight – 2192 kg
- Drawing No. – 9936_50443_00_A (the drawing in PDF format can be found under „Technical Documents (PDF)“)
- Still RX60-50
- Recommended charging current – 116.3 – 186 A
- It is also possible to order with Water Less elements – both standard and Water Less elements are placed in the box of the same drawing.
Designation and matches. You will find the marking on the battery 80V6PzS930 (80 V voltage, 6 positive plates per cell, DIN standard PzS cells, 930 Ah capacity). It is suitable as a replacement for 80V 6PzS930 traction batteries from other manufacturers, provided that the tray dimensions (1025 x 996 x 782 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
Enersys FIAMM (HAWKER) ENERGY PLUS is the most popular tubular traction battery on the market, with the highest quality and longest service life in the market - everyone agrees. They are the preferred choice of many new equipment manufacturers. ENERSYS objectively lasts much longer due to the specific technological solutions used (such as the densest positive plate on the market, which together accounts for 85% of the battery's natural wear and tear - hence the denser the positive plate, the longer the battery lasts), a different chemistry of the active mass, which makes batteries much more resistant to cell imbalance (which is, by the way, the most important cause of premature battery failure or accelerated loss of life), etc.,
You can take advantage of a special offer when ordering a battery for the interior - get the latest battery technology - the WATERLESS battery - for the ENERGY PLUS price (only the electrolyte level indicator contributes to the price): WATERLESS batteries need to be refilled with water 4 to 12 times less often than conventional batteries (depending on the charger used). The significantly lower water requirement further reduces the risk of cell imbalance and greatly simplifies battery operation!
When ordering batteries online, we will contact you in any case to arrange an exact drawing of the battery container. If you do not find the right capacity and/or dimensions among the most popular batteries, please contact us and we will help you find the right battery for you, or if you are looking for the cheapest solution, we will offer you that too.




